Product Overview
The controller receives 192 universes of E131, Artnet or DDP data and can output pixel data to 16 local strings and 4 receiver ports.
Product Specifications
- Data In: 192 Universes of E1.31 / Artnet / DDP
- Network Connectivity:
- 2-Port Switch to "Daisy-Chain" controllers
- Wireless ESP-07 Module with board mount antenna.(Optional external antenna available)
- Pixel Outputs:
- 16 pixel ports expandable to 32 with Smart Receiver boards (SRx1, SRx2, SRx4)
- All outputs can use any of the 98304 channels this controller can receive as a start address
- E-Fuses on all outputs, resettable, status indication on LEDS fuses as well as web UI
- Each string can be independently configured for null nodes, zigzag, forward / reverse, node type, pixel count , grouping etc
- Local Expansion:
- 4 x Smart Receivers Ports. Each can drive one receiver chain. Up to six receivers can be in a chain.
- Two-way communication with SRxN v5 receivers
- Current, voltage, and fuse status can be received from SRxN receivers
- Integration: Controller can store sequences on micro SD card and play in sync with FPP master.
- Power:
- Board can be powered from pixel power or external power. Both inputs can be 5 - 13VDC
- Power output port to power switches
- Two independent sides of power. Each one can be a different voltage
- Pixel per output: 1024 pixels per output in 16 to 32 string mode
- String Types: More than 70+ pixel types supported
- Sensors:
- 1 x Processor temperature sensor
- 2 x Additional temperature sensors
- The incoming pixel voltages of main board are detected and displayed in user interface. (The webpage interface and OLED displays the voltages and temperatures.)
- DMX/Renard Outputs: 1 x Dedicated RS-485 output / RJ-45 connector
- Construction: Single 4-Layer Board
- UI:
- 0.96" OLED 128x64 matrix display for setup and status.
- 5 x Push buttons to control display. Up, Down, Right, Left and Select
- Power LED indicator
- Two multi purpose LEDS for status
- 16 x fuse LED indicators
