Shop

New Customer
  info@wiredwatts.com   +1(860) Got-Watts
*99% of Orders Ship
in 24 Hours or Less

Network Pass-Through Gland Straight

Network Pass-Through Gland Straight

$7.50

Network Pass-Through Gland Straight

Availability: In stock - more than 200 available!
Model: ennetpassi
Brand: Wired Watts
Condition: New
Operating Weight: 0.9375 lbs
Shipping Weight: 0.064 lbs
Shipping Dimensions: 3" × 1.5" × 1.5"

Share:

Product Overview

The straight network pass-through is used to create a waterproof connection outside of your enclosure build that allows access to an RJ45 connection. This can be used for both Ethernet and RS485 serial. RS485 Serial has typical applications for remote receiver boards, DMX fixtures, and Light-O-Rama controllers. The installation requires a one inch hole in your enclosure. The network gland is inserted into the hole from the outside of the enclosure and secured with a nut on the inside of the enclosure. On the outside is a dust cover and a cover that is used for the cable to be attached. This gland requires a separate CAT5/6 patch cable installed inside of the enclosure to link the gland to the electronics.

Modified Use

To use these directly with a Kulp style controller for DMX or LOR output, you can remove the RJ45 connector from one end of your patch cable and directly connect it to the Kulp board in the following way. Any unused wires can be cut off or tied off for separate use.

  • LOR
    • T-568B (this is most common)
      • Solid Blue: Data Plus
      • Striped Blue: Data Negative
      • Solid Green: Ground
    • T-568A
      • Solid Blue: Data Plus
      • Striped Blue: Data Negative
      • Solid Orange: Ground
  • DMX
    • T-568B (this is most common)
      • Striped Orange: Data Plus
      • Solid Orange: Data Negative
      • Striped Brown: Ground
    • T-568A
      • Striped Green: Data Plus
      • Solid Green: Data Negative
      • Striped Brown: Ground

Video

Product Specifications

  • Compatible Connector Type: RJ45
  • Hole Size: 1 inch